R-77 Magnum rig, take 1 to 2 men to
operate. Has one engine for the driilling,
and one small engine for mud pump.
R77 Magnum trailer mounted drilling rig
Missionary training in
action
This well was drilled, and now screen and casing
is set in place. Now as you see, it is being blown
with air, and is producing good water. After this
well blows for a while longer, they will finish it up
by installing pump, tank and pressure switch.
Picture below is pump circulating and mixing
drilling mud, ( bentonite). Once it is mixed then
they are ready to start drilling, this was a porus
sand formation where drilling mud is a must.
Above" This was hard drilling in Limestone rock,
Driller used roller cone rock bit and 2 weighted
drill collars to get best penatration speeds.
Simple Plans for Geothermal rell table. When installing
geothermal loops, this makes the job easy. The
geothermal loop spool 510ft fits on top,then fill with
water and pressure test for leaks. If ok, then when
geothermal hole is drilled.Tape heavy weighted re bar on
bottom of geo loop reel. Then by hand reel loops in bore
hole, this makes it easy. If you have a old trailer axle hub
with rim, this makes building it even easier.
If you dont follow my directions in our
Water well drilling and troubleshooting
book, then you will need to purchase
this fishing tool to fish the drill pipe
back out.Our fishing tools make fishing
drill pipe a easier job. Mayhew jr
conection box.